LCR-2004   Brushless Outrunner - KV: 1130 rpm

Manufacturer:   ELE-Model
Specifications:
KV (rpm's):     1130
Voltage Range:     7.4 - 11.1 VDC (2 - 3 Cell LiPo)
Weight:     42 grams
Shaft Size:     3 mm
Size:     28mm Dia x 28 mm
Continuous Current:     12 Amps
Max Current:     15 Amps
Idle Current:     0.8 Amps
Resistance:     0.117 Ohms
IN-STOCK Web Price:
(USD$):  $50.50
Motor Power Specifications Table: (LCR-2004)
Testing was performed using a APC 9x4.7 Slow-Flyer Prop
Input Voltage Input Current Motor RPM Thrust @Sea Level Thrust @600' ASL
6.0 Vdc 7.3 Amps 5926 RPM 11.93 Oz 11.60 Oz
6.5 Vdc 8.2 Amps 6257 RPM 13.31 Oz 12.94 Oz
7.0 Vdc 9.1 Amps 6599 RPM 14.81 Oz 14.40 Oz
7.5 Vdc 10.1 Amps 6947 RPM 16.42 Oz 15.97 Oz
8.0 Vdc 11.0 Amps 7295 RPM 18.11 Oz 17.62 Oz
8.5 Vdc 11.9 Amps 7636 RPM 19.31 Oz 19.85 Oz
9.0 Vdc 12.8 Amps 7965 RPM 21.02 Oz 21.61 Oz
9.5 Vdc 13.7 Amps 8273 RPM 22.68 Oz 23.32 Oz
10.0 Vdc 14.6.0 Amps 8554 RPM 24.26 Oz 24.94 Oz

The above specifications were derived using an APC 9 x 4.7 Slow-Flyer prop, the data shown in orange are above the manufacturers recommended current.  The APC 9 x 4.7 Slow-Flyer prop, can be used as most models are not run at the max throttle for extended periods of time.  MAX Current is 12 Amps continuous, 15 Amps for not more than 20 second bursts.

Voltages of a specific battery vary based on there ability to supply the power being requested, so check your voltage and current draw while under full static load, NOTE: 3 Cell 10C battery will not supply the voltage that a 3 Cell 20C battery can.
DHTML Menu / JavaScript Menu Powered By OpenCube