LCR-2012   Brushless Outrunner - KV: 1022 rpm

Manufacturer:   ELE-Model
Specifications:
KV (rpm's):     1022
Voltage Range:     7.4 - 11.1 VDC (2 - 3 Cell LiPo)
Weight:     57 grams
Shaft Size:     3 mm
Size:     28mm Dia x 32 mm
Continuous Current:     15 Amps
Max Current:     19 Amps
Idle Current:     0.9 Amps
Resistance:     0.089 Ohms
IN-STOCK Web Price:
(USD$):  $56.80
Motor Power Specifications Table: (LCR-2012)
Testing was performed using a APC 10x4.7 Slow-Flyer Prop
Input Voltage Input Current Motor RPM Thrust @Sea Level Thrust @600' ASL
6.0 Vdc 6.0 Amps 4789 RPM 13.66 Oz 13.28 Oz
6.5 Vdc 7.1 Amps 5009 RPM 15.09 Oz 14.68 Oz
7.0 Vdc 8.1 Amps 5244 RPM 16.56 Oz 16.11 Oz
7.5 Vdc 9.2 Amps 5489 RPM 18.49 Oz 17.98 Oz
8.0 Vdc 10.2 Amps 5741 RPM 20.43 Oz 19.87 Oz
8.5 Vdc 11.2 Amps 5999 RPM 22.52 Oz 21.90 Oz
9.0 Vdc 12.3 Amps 6257 RPM 24.73 Oz 24.05 Oz
9.5 Vdc 13.3 Amps 6512 RPM 27.02 Oz 26.28 Oz
10.0 Vdc 14.3 Amps 6761 RPM 29.37 Oz 28.57 Oz
10.5 Vdc 15.4 Amps 6999 RPM 31.71 Oz 30.85 Oz
11.0 Vdc 16.4 Amps 7221 RPM 33.99 Oz 33.06 Oz

The above specifications were derived using an APC 10 x 4.7 Slow-Flyer prop, the data shown in orange are above the manufacturers recommended current.  The APC 10 x 4.7 Slow-Flyer prop, can be used as most models are not run at the max throttle for extended periods of time.  MAX Current is 15 Amps continuous, 19 Amps for not more than 20 second bursts.

Voltages of a specific battery vary based on there ability to supply the power being requested, so check your voltage and current draw while under full static load, NOTE: 3 Cell 10C battery will not supply the voltage and/or current that a 3 Cell 20C battery can.
DHTML Menu / JavaScript Menu Powered By OpenCube